JUMAG Hot-Water Boiler NEMO
Do you need hot water? Then you’ve come to the right place. Thanks to its compact design, the JUMAG NEMO hot water boiler takes up little space and scores with minimum maintenance and maximum energy efficiency. It is equally at home in office buildings, hospitals, hotels and residential buildings.
Also available for rent
Advantages of the JUMAG NEMO Hot-Water Boiler
Space-saving
Thanks to its compact design, the NEMO takes up less space than conventional boilers and offers you additional room for your ideas.
Low in cost
The NEMO can be operated efficiently. It uses a closed water circuit. This means you not only save on acquisition costs, but also on ongoing water expenses. In addition, there is no need for costly water treatment.
Low maintenance requirements
You do not need peripheral devices such as ASG or WAM. This makes operating the NEMO particularly straightforward and requires only minimal maintenance.
Basic Equipment NEMO
- Hot-water boiler (DG series)
- Burner
- Double-walled pressure vessel in the design of a small water chamber boiler
- Self-explanatory touch screen control
- Integrated electrical cabinet
- Safety components: Safety valve, overpressure cut-off, minimum pressure cut-off, hot water overtemperature cut-off, low water cut-off, flow monitoring
Not included in the scope of delivery:
- Circulation pump
- Expansion vessel
JUMAG NEMO hot-water boiler in detail
Functionality of the hot-water boiler
Why do JUMAG hot-water boilers require minimal maintenance and boast maximum energy efficiency? They utilise a closed water circuit and run without peripheral devices.
The hot-water boiler is part of a closed system in which pressurised water is continuously circulated by the boiler pump.
The burner is controlled depending on the flow temperature.
Heat is transferred from the flue gas via the hot water generator to the water through multiple flue gas ducts.
As the system pressure of the entire hot-water network is constantly above the saturation steam pressure, water temperatures of 110°C or more are reached in the boiler.
Technical data NEMO
| NEMO 260 | NEMO 500 | |
|---|---|---|
| PED 2014/68/EU | Category III | Category III |
| Max. Operating pressure (PS) | 6 barg | 13 barg |
| Max. Working Pressure | 5 barg | 12 barg |
| Test pressure pressurised vessel (PT) | 23 barg | 22,2 barg |
| Heat load | 85 - 175 kW | 360kW |
| Heat output | 77 -157 kW | 340kW |
| Total volume (V) | 49 Litres | 215 Litres |
| Max. permitted temperature (TS) | 185 °C | 195 °C |
| Heat-up time in minutes | 5 | 10 |
| Max. Oil flow rate (11,8 kWh/kg) | 14,8 kg/h | 30,5 kg/h |
| Max. Natural gas flow rate (10,35 kWh/m³) | 16,9 m³/h | 34,7 m³/h |
| Min. gas flow pressure | 17 mbarg | 20 mbarg |
| Flue gas connection (inside diameter) | 301 mm | 301 mm |
| Exhaust mass flow | 0,08 kg/s | 0,17 kg/s |
| Min. flue draught (at 150 °C) | 5 Pa | 5 Pa |
| Electrical connection | 400 V / 50 Hz | 400 V / 50 Hz |
| Electrical connected load | 3,2 kW | 3,2 kW |
| Ambient temperature | 5 °C - 35 °C | 5 °C - 35 °C |
| Leeweight | 700 kg | 1300 kg |
| Noise level | 58 dbA (Oil) 61 dbA (Gas) | 76 dbA (Oil) 76 dbA (Gas) |
| Gas connection | 1" | 1" |
| Flow connection (PN16) | DN25 | DN25 |
| Return flow connection (PN16) | DN25 | DN25 |
| Safety valve connection Götze 6 barg (PN16) | DN32 | DN25 |
Areas of application and use cases of the NEMO
Find out why the NEMO hot-water boiler exists, what it is best used for and what the difference is to a steam generator in our blog post.
FAQ
This always depends on our production workload and can change daily. Please call your contact person at JUMAG to confirm the current delivery times.
We provide 12 months warranty. If you would like a warranty beyond this period, it is possible in connection with a service contract. Simply contact us.